Original Xiaomi Router 4 Mi Wifi Repeater 2.4G 5GHz 1167Mbps Fiber optic Full Gigabit Smart Router 128MB MiNet Fast APP Connect

Original Xiaomi Router 4 Mi Wifi Repeater 2.4G 5GHz 1167Mbps Fiber optic Full Gigabit Smart Router 128MB MiNet Fast APP Connect
  • Продавецbooks-in.us
  • Список ценUS $53.51piece
  • Продажная ценаUS $53.51piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,9 (639)

Oписание продукта

 

 OPENWRT firmware
 (Suitable for engineer developing, User Interface: not that friendly for end users) 

 

Noted:

 

This item with 2 Modules for your choice ,pls make sure which module frequency suitable for your country before you make order.thanks!

 

 support 3G/4G network band( can work in USA) :

(EC25-A Mini PCIe)---For USA/CA/Mexico countries.

FDD LTE: 1900Mhz(b2)/1700Mhz(B4) 850Mhz(B5)700Mhz(B12)

UMTS: 1900(B2)/1700Mhz(B4)/ 850Mhz(B5)

EC25-E Mini PCIe)---For Most of countries in the world

FDD : 2100MHz(Band 1) / 1800MHz(Band 3) / 850MHz(B5)/ 2600Mhz(B7)/900MHz(B8)/ 800Mhz(B20)

TDD: 2600MHZ B38/ 2300MHZ B40 /2500MHZ B41

WCDMA: 2100Mhz(B1) / 850Mhz (B5)/ 900MHZ(B8)

 

Hardware:

 

WG3526-4G is using MTK7621 solution, up to 880MHz. It supports 5*10/100/1000M RJ45 port, 1*USB 3.0, 1* internal PCI-E interface, 1*Micro SD Card, SATA3.0 and so on.

 

Wireless:

 

It is compatible with IEEE802.11AC/N/G/B/A wireless network protocol. The max wireless transfer rate up to 1200Mbps. The external 4 pcs 5dBi antennas can make good wireless performance and broader coverage

 

Software:

 

The original OpenWrt based on Linux is including 802.11ac, IPV6 and Win8 certification, which provides drivers to support VPN upper layer software, audio and touch screen. L7 QoS can work with on-chip hardware accelerators HNAT/HQoS smoothly, it also provides Auto QoS function for Internet and SMB routers.

 

Spec:

 

New dual-core network chipset MT7621, up to 880MHz

Provides 5* 10/100/1000Mbps RJ45 ports

Provides 1* external USB 3.0

Provides 1* PCI-E interface to supports 3G/4G

Provides 1* Micro SD Card

Compatiable with IEEE IEEE802.11AC/N/G/B/A wireless standard

Wireless transmission rates is up to 1200Mbps  

 

 

2594707790_87478062594716497_87478062599494119_8747806Dual-core-SIM-slot-802-11n-openwrt (1)Dual-core-SIM-slot-802-11n-openwrt (2)Dual-core-SIM-slot-802-11n-openwrt (3)Dual-core-SIM-slot-802-11n-openwrt802-11AC-dual-band-3G-4G-OpenWrt-Firmware-WiFi-Router-with-sim-card-slot-support-TD (2)

QQ20170802151731HTB1_FOsPFXXXXbyXpXXq6xXFXXXfHTB1N5edPFXXXXc6XFXXq6xXFXXXSProduct User Manual 

1

2

3

4

5

6

7

9

10

11

12

 

 

3G 4G Module Setting Guide

1. Connect to all the antennas correctly.

2. The sim card must insert firstly, and the chip of the sim card should be upward, then connect to the power. If you need to remove the sim card, in order to avoid damaging the SIM card, please remember to cut off the power before you remove sim card. 

 

001

002

003

 

Upgrade Firmware

 

If you can access into the recovery mode, that means the router hardware is ok. You can flash the firmware I sent you.

But if you can not access into the recovery mode, sorry, you have damaged the router hardware.

1

2image